To replace your HDD with a new HDD you need the following:.The OWC HDD Upgrade Kit is also available with the necessary tools to carry out the upgrade: OWC DIY HDD Upgrade Kit for iMac 2012 and later This drive converter bracket enables you to install a 2.5-inch SSD in a 3.5-inch SATA drive bay. SSD’s are smaller in size than HDD’s, so you cannot install them in the existing drive bay without it. The NewerTech AdaptaDrive: this is a 2.5-inch to 3.5-inch SATA convertor bracket, which is used to mount an SSD in an iMac’s drive bay. Using this kit, your iMac will fully meet Apple’s Hardware Test standards and fans will run at normal speeds without the use of any third-party software or hacks. The OWC HDD Upgrade Kit for iMac 2012 and later this kit is placed between the iMac’s SATA power connector and the HDD or SSD. To replace your HDD with an SSD you need the following:.Replacing the HDD with a new HDD up to 8TB.This will not harm your iMac, but it can be a nuisance, and what’s more, it is unnecessary because with the right products it can be prevented.
If you replace your drive with a new HDD or SSD without taking care of the temperature sensor, sooner or later you will be confronted with a fan operating at full speed. In 2009 iMac models and later, Apple has installed firmware on its HDDs for measuring temperature. The most important thing to consider when installing an SSD is the temperature sensor. On this page, we will explain – per iMac model – the possibilities for installing an SSD or replacing HDD, and the equipment needed. The SSD and memory are both quite easy to install yourself. Apart from the SSD, the speed of your iMac depends on the processor, video card and memory. Would you like to know the possibilities for your iMac? Scroll down and find out!Īn SSD can really improve the performance of your iMac.
On this page, you will find an overview of the SSD (Solid State Drive) and HDD (Hard Disk Drive) upgrade options for your iMac, as well as the equipment you need.
0 kommentar(er)
